3-4
•
User Controls
ADC-8432 User Manual (Iss. 01)
DIP SW3, SW4 and SW5 — Internal Sample Rate
SW3
,
SW4
, and
SW5
are used in combination to set the internal sample reference rate. Ensure
that
SW1
and
SW2
are both set to the
ON
position.
Table 2
lists the combinations for
SW3
,
SW4
and
SW5
.
Table 2. DIP SW3, SW4 and SW5 Settings Descriptions
SW3
(SR SEL
MSB)
SW4
(SR SEL)
SW5
(SR SEL
LSB)
Description
OFF
OFF
OFF 32kHz
OFF OFF ON
44.1kHz
OFF ON OFF
48kHz
OFF ON ON
96kHz
ON
--
-- 192kHz
DIP SW6
This feature is not yet implemented.
DIP SW7 — Default DIP Switch/Memory
SW7
is used to enable or disable the parameters set by the DIP Switches on the ADC-8432.
Set
SW7
as follows:
•
ON
— Select this setting to retrieve the ADC-8432 parameters from the non-
volatile memory. The DIP Switch settings are ignored.
•
OFF
— Select this setting to enable the ADC-8432 to retrieve parameters from
the DIP Switches.
DIP SW8 — DashBoard Disable
SW8
is used to disable remote control of the ADC-8432 from the DashBoard Control System.
Set
SW8
as follows:
•
ON
— Select this setting to disable remote control from DashBoard. The
parameters and settings cannot be changed via DashBoard and must be changed
using the card controls. You can still monitor the status of the card using
DashBoard.
•
OFF
— Select this setting to control the ADC-8432 exclusively from
DashBoard. The card controls are ignored.