
5–16 • Front Panel Menu System
ACO-4400A User Manual (Iss. 03)
Network Menu
provides an example of the Network Menu.
Figure 5.11
Network Menu Example
The Network Menu, and the associated sub-menus, allows the user to configure and control the
behavior of the Ethernet system within the ACO-4400A. Before proceeding, the user must
contact their Network Administrator, and obtain suitable IP addresses, etc., that will need to be
programmed within this menu.
IP Address
This menu line allows the user to enter the pre-determined IP address of the ACO-4400A. The
options in the sub-fields are: 000 through 255 where 000" is the default “no action” setting.
To change the settings:
1.
pressing the rotary control advances through each sub-field
2.
rotating the rotary control changes the value of the currently selected sub-field.
SubNet Mask
This menu line allows the user to enter the pre-determined SubNet Mask address of the
ACO-4400A.
The options in the sub-fields are: 000 through 255 where “000” is the default “no action” setting.
To change the settings:
1.
pressing the rotary control advances through each sub-field
2.
rotating the rotary control changes the value of the currently selected sub-field.
Gateway
This menu line allows the user to enter the pre-determined Gateway address of the ACO-4400A.
Typically, this might be the IP address of a network hub to which the ACO-4400A is connected.
The options in the sub-fields are: 000 through 255 where “000” is the default “no action” setting.
To change the settings:
1.
pressing the rotary control advances through each sub-field
2.
rotating the rotary control changes the value of the currently selected sub-field.
MAC Address
This menu line displays the MAC Address (Media Access Control), a unique, read-only identifier
assigned to network interfaces for communications on the physical network segment.
MAC Address
0000.0000.0000
=
-NTP
Menu Enter ->
-Dashboard
Menu Enter ->
-Backup device
Menu Enter ->
Subnet Mask
000.000.000.000
=
Gateway
000.000.000.000
=
IP Address
000.000.000.000
=
Summary of Contents for ACO-4400A
