DETOUR User Guide (v3.0)
DashBoard Menus • 21
DashBoard Menus
This chapter provides a brief summary of the DashBoard menus available for DETOUR. Default values are
indicated with an asterisk (*).
Some tabs in DashBoard display read-only fields with indicators. The indicators vary in severity from green (valid),
yellow (caution), to red (alarm). DashBoard reports the most severe alarm for a single field. Indicator colors are
noted within the tables as text set in parentheses next to the menu parameter.
Signal Tab
outlines the read-only fields displayed in the
Signal
tab.
Hardware Tab
The
Hardware
tab provides an overview of the DETOUR power supplies and overall status. Note that some alarms
must be enabled in the
Setup
tab before the fields in the
Hardware
tab can report the related error messages.
outlines the read-only information displayed in the
Hardware
tab.
Table 5.1 Signal Tab
Parameters
Description
Signal Presence
Present (Green)
A valid input signal is connected to the SDI IN HD-BNC
Missing (Yellow)
The Alarm on LOS box is not selected on the Alarms tab; the
SDI IN HD-BNC is not monitored.
Missing (Red)
A valid input signal is not detected on the SDI IN HD-BNC
Detected Reclocker Rate
Unlocked
An input signal is present, but not locked
MADI
The reclocker is set to 125Mbps
SD
The reclocker is set to 270Mbps
HD
The reclocker is set to 1.485Gbps
3G
The reclocker is set to 2.97Gbps
6G
The reclocker is set to 5.94Gbps
12G
The reclocker is set to 11.88Gbps
Table 5.2 Hardware Status
Parameters
Description
External Power
Present (Green)
A valid external power supply is connected to POWER port on
the DETOUR chassis
Missing (Yellow)
The Alarm on External Power Loss box is not selected on the
Alarms tab; the POWER port on the DETOUR chassis is not
monitored
Summary of Contents for 9201DR-104-03
