Squeeze & Tease Overview • 5
Squeeze & Tease Overview
The Squeeze & Tease™ MD option consists of a carrier board and a number of
daughter cards that are installed into the frame.
In order to install the Squeeze & Tease MD option, you must upgrade the
switcher software, install the daughter cards onto the Squeeze & Tease Carrier
Board, and install the Squeeze & Tease Carrier Board into the frame.
Important
— Although the Squeeze & Tease Carrier Boards
are hot-swappable, any Squeeze & Tease resources on those
cards that are being used, Flying Keys for example, will be lost
when the board is removed.
The hardware for the Squeeze & Tease MD option consists at least one Squeeze
& Tease MD Carrier Board. On this Squeeze & Tease MD Carrier Board, there
are slots for 4 Squeeze & Tease MD Cards, each providing 2 channels of DVE
resources, and slots for 2 Squeeze & Tease WARP MD Cards.
The total number of Squeeze & Tease MD cards you can use depends on the
number of MLEs you have and the switcher you are installing them into. Refer
to your Vision switcher documentation for the number of Squeeze & Tease MD
and Squeeze & Tease MD WARP cards you can install for each MLE.
Note
— Squeeze & Tease MD DVE channel resources are
shared between both MLEs, the MLE-Pair, on the same Video
Processor Board. If all DVE channel resources are applied to
one MLE, there will be no resources available to the other MLE
in the MLE-pair.