5
Fix the one-way-valve to the air outlet of the cooker hood. Then,
attached the exhaust pipe onto the one-way-valve as shown below.
Chimney installation.
Sliding the chimney to adjust the chimney height. When the
height you required is reached, then hang the fixing hole to the
fixing screws as showed in below pictures.
Drill 2
×
8mm holes to accommodate the plate II. Screw and
tighten the plate II onto the wall with 2 screws provided.
Assembly the chimney onto the unit and fix it with 2 screws.
Upper chimney
Lower chimney
Plate II
Rawl plug
Screw (4mmx8mm)
Screw (4mmx30mm)
Exhaust pipe
Cooker hood
