7. Install the expansion pipe:Attach the expansion pipe onto the one-way-valve.
Fix
the expansion pipe on the valve by cable tie. Lift up expansion pipe till it out of the
wall through the hole on the wall.
Note:The expansion pipe is not included in the product.
WARNING:
For safety reason, please use only the same
size of fixing or mounting screw which are
recommended in this instruction manual.
Failure to install the screws or fixing device in
accordance with these instructions may result
in electrical hazards.
Start Using Your Cooker Hood
Slide switch
Slide switch
There are 3 speeds for the motor and on off switch for the lamp.
Slide the switch for operation.
Motor Operation
0-
off
1-
Low Power Setting
2-
Mid Power Setting
3-
High Power Setting
Light Operation
0-
Off
1-
On
TROUBLESHOOTING
Fault
Possible Cause
Solution
Light on, but
motor does not
work
Fan switch turned off
Select a fan switch position.
Fan switch failed
Contact service center.
Motor failed
Contact service center.
6