Wireless Adapter
RNX-N100 User Manual
46
way for the SOHO to set up a wireless network.
•
Profile
: Enter a name for the profile; this does not need to be the same as the SSID.
•
SSID
: Enter the SSID of the network or select one from the drop-down list. The SSID is
a unique name shared among all points in your wireless network. The SSID must be
identical for all points in the network, and is case-sensitive.
•
Network Type
: Select
Ad-hoc
from the drop-down list.
•
TX Power
: Select a transmit power from the drop-down list. If your notebook is
connected to external power then select
100%
or
auto
, if not, select one of the lower
values for power saving.
•
Preamble
: Select Auto from the drop-down list, unless you are aware of the preamble
type (long or short) used in each station.
•
Ad-hoc wireless mode
: Select a wireless mode from the drop-down list depending on
the type of stations used in the ad-hoc network. Select B/G Mix if the network consists
of 11b and 11g stations. Select B-only or G-only if the network consists of only one
type of wireless mode.
•
RTS Threshold
: Place a check in this box if you would like to enable RTS Threshold.
Any packet in the RTS/CTS handshake larger than the specified value (bytes) will be
discarded.
•
Fragment Threshold
: Place a check in this box if you would like to enable Fragment
Threshold. Any packet larger than the specified value (bytes) will be discarded.
•
Click on the
Apply
button to save the changes.
