External Enclosure For 3.5” SATA to USB + eSATA
User Manual
Please read this installation carefully before you use the
products.
Precaution:
•
If it is a new HDD, needs to processing the disk partition
•
Win98SE and WinME do not recognize NTFS formatted drives, so
if you want to use your drive on those platforms, we recommend
you to use FAT32 instead.
•
Mac OS does not recognize NTFS formatted drives, to use your
device on both platforms, we recommend you using FAT32.
•
If you use Win2000 / WinXP / Win Vista and FAT32, the biggest
single partition you can create will be 32GB. To create larger
partitions, you need to change to NTFS format.
•
Make sure the jumper settings of your hard drive is “master”.
System Requirement
•
Minimum Intel Processor II 350MHz, 64MB RAM
•
Compatible with IBM PC, USB interface included
，
Windows98SE/ME/2000/XP/Vista operate system.
•
Minimum Apple G3 processor, 64MB RAM
•
MAC computer system MAC OS V8.6 or higher.
•
Linux OS: please download kernel USB stack.
Protection of DC adapter:
1. Primary (Input) Protection
The input power line will be fused with a fuse 2.0A, 250 VAC.
2. Secondary (Output) protection
2.1. Over Current (OC) Protection
When an internal fault occurs, or an external fault is applied to
the power, such that an overload or short circuit is applied to
the output, the power will be shutdown. Power latch is not
allowed.
1
