Rosewill RX200R-APU3-25B, User Manual

Page: 5 / 30

4
V. Hardware setup and under WIN XP/VISTA/7/8 use :
There have mode which in the rear back of the product, it can
form 4 kinds of different ways through mode switch, it can realize 4
kinds of different functions as below :
RAID1 RAID0 JBOD 2LUN
1. JBOD function Mode
Pleasee move Mode Selective Switch till the position that just
under JBOD mark. Connect power supply with product
properly(Not Allowed to connect USB3.0 Cable at the same
time)Hold Reset button, And power on product, After holding
button with cotinuous 5 seconds, Product will switch to JBOD,
Connect USB 3.0 cable, Product will work well under JBOD
mode.
The JBOD storage policy concatenates a series of physical hard
drives as a single large volume ; resulting in a seamless expansion
or virtual volumes beyond the physical limitations of singurlarly
connected hard drives.
Hard drive A and B are concatenated into a single virtual volume in
the Figure below with a storage capacituy that is equal to the sum of
each of the physical hard drives A and B.