Rosewill RNX-N300UBv2 User Manual Download Page 4

6

7

Wireless N300 Mini USB Wi-Fi Adapter

Wireless N300 Mini USB Wi-Fi Adapter

User Manual

User Manual

RNX-N300UBv2

RNX-N300UBv2

SECTION 2: Quick Installation Guide

Please install the adapter into your computer before installing the driver from 
the Resource CD.

2.1 Hardware Installation

2.1 Software Installation

Insert the wireless USB adapter into an empty USB 2.0 port of your computer 
when it is switched on. 

Note:

 When the adapter has been successfully installed on your computer, you 

may be prompted by the Found New Hardware Wizard (Figure 2-1). Please 
click “Close” and follow the software installation steps to install the driver and 
utility for your computer.

1. 

Figure 2-1 New Hardware Wizard found in Windows 7

Figure 2-2 AutoRun Window

Normal

Interface

High Speed USB 2.0 Interface

Standards

IEEE 802.11n; IEEE 802.11g; IEEE 802.11b 

Frequency Band 2.4 GHz ISM (Industrial Scientific Medical) Band

Radio Data Rate

802.11b: 11/5.5/2/1 Mbps Auto Fallback
802.11g: 54/48/36/24/18/12/9/6 Mbps Auto Fallback
802.11n: up to 300 Mbps (Downlink) and 300 Mbps (Uplink)

Modulation

11b: DQPSK, DBPSK, DSSS, CCK 
11g: BPSK, QPSK, 16QAM, 64QAM, OFDM
11n: BPSK, QPSK, 16QAM, 64QAM with OFDM

Media Access 
Protocol

CSMA/CA with ACK

Data Security

64/128-bit WEP Encryption
WPA, WPA-PSK, WPA2, WPA2-PSK, TKIP/AES

Frequency*

2412 - 2462 MHz (North America)
2412 - 2472 MHz (Europe)

Radio Channel*

1 to 14 channels (Universal Domain Selection)

Operating System Windows 7/8/8.1/10 (32/64-bit), Linux, Mac OS 10.6-10.16
Certifications

FCC, CE

* Only 2.412 GHz-2.462 GHz is allowed to be used in the USA, which means only channels 1-11 are available for American users to  

 choose.

Insert the resource CD into your CD-ROM drive. An AutoRun window will pop 
up (Figure 2-2). Click the “Driver Installation” button to start the installation 
procedure. If AutoRun does not work, browse the Resource CD, open the folder 
and double-click “Setup.exe” to begin.

1.4 Specifications 

Environmental and Physical

Working Temperature 0

˚

C to 40

˚

C (32

˚

F to 104

˚

F)

Storage Temperature -40°C to 70°C (-40°F to 158°F)
Working Humidity

10% to 90% RH, Non-Condensing

Storage Humidity

5% to 95% RH, Non-Condensing

Summary of Contents for RNX-N300UBv2
















Reviews: