Wireless N Adapter
RNX-N150PCx User Manual
Figure 7-19
3.
Enter your password in the Key#1 Hexadecimal
field. This value is same as your intended AP's
setting. Click
“
OK
”
, then this process will be
complete.
Note:
if the WPA Pre-Shared Key entered is not correct, you
won’t be able to exchange any data frames, even though the AP can
be connected.
7.3.2
Example to Configure Connection with
WPA-PSK
1.
Select an AP with WPA-PSK authentication mode
and click "Connect".
2.
The Auth.\Encry. function will appear as below
select WPA-PSK
as the Authentication Type, then
select TKIP or AES
for encryption.
Enter the WPA
Pre-Shared Key
. The WPA Pre-Shared Key here is
use your intended AP
’
s setting. (12345678 here is
just a reference, please use a more complex
password for better protect of your wireless
network).
Figure 7-20
3.
Click
“
OK
”
, then the process is complete.
- 44 -