11
Wireless N150 Nano USB Adapter
User Manual
RNX-N150NUBv2
Windows 7 users may use the built-in wireless utility. Follow the steps below:
Windows 8.1 users may use the built-in wireless utility. Follow the steps below:
3.2 In Windows 7
3.3 In Windows 8.1
1.
1.
2.
3.
4.
Click the wireless icon in your system tray (lower-right corner). The utility will
display any available wireless networks in your area. Highlight the wireless
network (displayed using the SSID) to be connected and then click “Connect”.
Click the icon at the bottom of your screen, and a network list will appear at the
right side of your screen. Select your target network, and then click “Connect”.
If the network you selected is encrypted, enter the same security key or
passphrase that is on your router. If the network is not secured, the connection
will be established without entering a key.
When “Connect” appears behind the SSID, you have successfully connected to
the target network.
If the network is security-enabled, you will be prompted to enter the key as
shown below (Figure 3-3). If not, you will connect to the network directly without
entering a key.
Figure 3-3
Figure 3-4