RNX-N150NUB
N150 Wireless Nano USB Adapter
Chapter 5 SoftAP Mode
In Soft AP mode, the adapter will work as an AP.
Suppose that only one computer in your house can access the Internet for various reasons like
only one LAN port is available on your wired broadband router, however, other wireless-capable
devices also want to share the Internet. Then the adapter can be configured as an AP under the
Soft AP mode, saving you the trouble of having to get a separate access point or a router.
With this feature, a computer can use a single physical wireless adapter to connect as a client
to a hardware access point while at the same time acting as a software AP allowing other
wireless-capable devices to connect to it.
To switch to this mode, right-click on the utility icon in your system tray and select
Switch to
SoftAP mode
.
Figure 5-1
Or from the
Advanced
page of the utility, tick
ON
under the
SoftAP mode
as shown in the
following figure. Click
OK
when prompted to confirm the setting.
Figure 5-2
The
Soft AP
icon should then appear beside
Advanced
icon in the utility.
33
