Wireless Dual Band USB Adapter
RNX-AC600UB User Manual
28
2-6 Establish secure connection with AP by WPS
Wi-Fi Protected Setup (WPS) is the latest wireless network technology which makes wireless network
setup become simple. If you have WPS-enabled wireless access point, and want to establish a secure
connection to it, you don’t have to configure the wireless access point and setup data encryption by
yourself. All you have to do is to go to the WPS setup page of this wireless card, click a button, and
then press a specific button or enter a set of 8-digit code on the wireless access point you wish to
establish a secure connection - just three simple steps!
For older wireless access points, it’s possible to perform a firmware upgrade to become a
WPS-enabled access point. Since they may not have a hardware button to press for WPS setup, you
can use an alternative WPS setup method - input the pin code. Every WPS-compatible wireless
network card support pin code configuration method; you can just input the code to wireless access
point, and the wireless access point and wireless network card will do the rest for you.
This wireless network card is compatible with WPS. To use this function, the wireless access point you
wish to connect to must support WPS function too. Now, please follow the following instructions to
establish secure connection between WPS-enabled wireless access point and your wireless network
card.
This wireless network card supports 2 kinds of WPS: PIN code and Push-Button.
1. Right-click Realtek configuration utility icon, and click
‘Open Config Utility’
.
