2
FCC STATEMENT
This device has been tested and found to comply with limits
for a Class A digital device, pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated
in a commercial environment. This equipment generates and
radiates radio frequency energy and, if not installed and used
in accordance with the user manual, may cause interference
in which case users will be required to correct interference at
their own expense.
CE MARK WARNING
This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.
• 1 x RNWA-PoE-4065, 4-Port Gigabit Power over Ethernet (PoE) Injector Hub
• 1 x 65 Watts Power Adapter
• 1 x Power Cord
• 1 x User Manual
• 4 x Rubber Feet
PACKAGE CONTENTS
HARDWARE INSTALLATION
1. Plug the power cord into the device and the other end into an electrical
outlet.“PWR” LED will be on.
2. Connect the RJ45 cable from the “Data In” port on the Injector Hub to
the Ethernet port of your switch.
3. Connect your IEEE 802.3af/at compliant Powered Devices (PD) to the
“PoE Out” port on the Injector Hub with suitable network cable. The
device will automatically supply power to remote PD. Now, “PoE” LED
indicators will be on.
4. Ensure the PDs are on and all Ethernet cables are connected correctly
and tightly.
