5
1. Cooking Presets
A. Power Modes:
[Keep Warm]:
Press the [Keep Warm] key until the [Keep Warm] indicator lights up. The
display will show
[300]
representing that the preset power is 300W. It can be
adjusted by pressing the [-] key to set the desired power level from 300W to
100W. To cancel this mode and switch to a different one, press another mode
key or the [ON/OFF] key to completely stop the operation and put the unit
into standby mode.
[Low]:
Press the [Low] key until the [Low] indicator lights up. The display will show
[500]
representing that the preset power is 500W. It can be adjusted by pressing the [+] or [-]
key to set the desired power level from 600W to 400W.
[Medium]:
Press the [Medium] key until the [Medium] indicator lights up. The display will
show
[1000]
representing that the preset power is 1000W. It can be adjusted by
pressing the [+] or [-] key to set the desired power level from 1200W to 700W.
[High]:
Press the [High] key until the [High] indicator lights up. The display will show
[1500]
representing that the preset power is 1500W. It can be adjusted by pressing the [-]
key to set the desired power level from 1500W to 1300W.
B. Temperature Modes:
[Stew]:
Press the [Stew] key until the [Stew] indicator lights up. The display will show
[220F]
representing that the preset temperature is 220°F. It can be adjusted by pressing
the [+] or [-] key to set the desired temperature from 15 levels between 140°F and
460°F. To cancel this mode and switch to a different one, press another mode key
or the [ON/OFF] key to completely stop the operation and put the unit into standby
mode.
[Stir Fry]:
Press the [Stir Fry] key until the [Stir Fry] indicator lights up. The display will show
[280F]
representing that the preset temperature is 280°F. It can be adjusted by
pressing the [+] or [-] key to set the desired temperature from 15 levels between
140°F and 460°F. To cancel this mode and switch to a different one, press another
mode key or the [ON/OFF] key to completely stop the operation and put the unit
into standby mode.
[Deep Fry]:
Press the [Deep Fry] key until the [Deep Fry] indicator lights up. The display
will show
[360F]
representing that the preset temperature is 360°F. It can be
Operating Instructions
A. Connect the power cable to an available outlet.
B. After inserting the plug into a socket, the induction unit will “beep” and the indicator light above
the [ON/OFF] key will flash, meaning the unit is connected to a power source and is currently in
standby mode.
C. Place compatible cookware on the center of the cooking zone.
D. To begin heating, press the [ON/OFF] key to power on the unit.
E. Select your cooking mode from 8 presets, separated into two categories by Power (wattage) and
Temperature (Fahrenheit).
F. Once the desired preset key has been selected, press the [+] or [-] key to adjust Power or
Temperature levels.
G. Cancel or stop the induction heating process at any time by pressing the [ON/OFF] key.
Note:
The fan will run for 60 seconds after the induction cooker is turned off, which serves as a
protection function to preserve the machine.