9
auto MDI / MDI-X function, using a straight cable to make a
switch-to-switch connection is allowed.
1.
Crossover or straight-through cable:
All the ports on the switch
support Auto-MDI/MDI-X functionality. Both straight-through or
crossover cables can be used to connect the switch with PCs as
well as other devices like switches, hubs or router.
2.
Category 3, 4, 5, 5e or 6 UTP/STP cable:
To make a valid
connection and obtain the optimal performance, appropriate
cables corresponding to different transmitting/receiving speed is
required. To choose a suitable cable, please refer to the following
table.
Media
Speed
Wiring
10/100/1000 Mbps
ports
10 Mbps
Category3,4,5 UTP/STP
100 Mbps
Category 5 UTP/STP
1000 Mbps
Category 5e, 6 UTP/STP
Ports that support
PoE
10/100/1000 Mbps
Category5,5e,6 UTP/STP
or above
Product Specifications
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
IEEE 802.3af/at PoE standard (DTE power via MDI)
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p QoS (Fixed LAN Layer 2 QoS/CoS Protocol)
IEEE802.3x flow control
Interface
8 * 10/100/1000 Mbps auto MDI/MDI-X RJ-45 ports
(Port 1~4 support PoE power feeding)
(Port 1~2 support PoE+ power feeding)
Network Data
Rate
10/100/1000Mbps Auto-negotiation
Transmission
Mode
10/100Mbps: Full-duplex, Half-duplex
1000Mbps Full-duplex
