7-in-1 Internal Card Reader with Floppy Drive
RCR-FD200 User Manual
4
Back
1 USB2.0
Connector
2 Power
Connector
3
Floppy Drive Connector
4
Pin1 (Red Line connect to pin1)
Hardware Installation:
1. Shut down the computer before installing the RCR-FD200
2.
Unscrew to open one cover of the desktop.
3.
Insert the drive into the 3 1/2” bay
4.
Connect the USB2.0 cable from the RCR-FD200 to the motherboard
CAUTION:
Please refer to your motherboard manual for the USB header pin assignment information.
The wrong connection may HARM the RCR-FD200.
The USB cable is consist of Red, White, Green and Black wires. Each of them shall be
connected to a specific pin to the USB header of the motherboard.
