background image

SATA II/ATA 133 PCIe Card 

RC216

                                                               

                User Manual     

 

     

 

 

7

BIOS.

 

2.

 

At the next screen select 

Create RAID Disk Drive

, press 

Enter

.

 

3.

 

Enter RAID name, press 

Enter

.

 

4.

 

Please use arrow keys 

 

and 

to

 

switch the RAID level to 

1-Mirror

, then press 

Enter

.

 

5.

 

Please use arrow keys 

 

and 

to

 

switch the disk, use the “space” 

key to mark the selected disk, then press 

Enter

.

 

6.

 

Input the RAID size, press 

Enter

.

 

7.

 

When asked 

Created RAID on the select HDD (Y/N)?

, press 

to 

accept.

 

8.

 

At the next screen select 

Save And Exit Setup

, press 

Enter

. When 

asked 

Save to disk &Exit (Y/N)?

, press 

to exit the BIOS.

 

CONCATENATION (JBOD) 

1.

 

As the BIOS boots press 

Ctrl+J 

when prompted to enter the RAID 

BIOS.

 

2.

 

At the next screen select 

Create RAID Disk Drive

, press 

Enter

.

 

3.

 

Enter RAID name, press 

Enter

.

 

4.

 

Please use arrow keys 

 

and 

to

 

switch the RAID level to 

JBOD-Concatenate

, then press 

Enter

.

 

5.

 

Please use arrow keys 

 

and 

to

 

switch the disk, use the “space” 

key to mark the selected disk, then press 

Enter

.

 

6.

 

Input the RAID size, press 

Enter

.

 

 

Summary of Contents for RC216

















Reviews: