10G Dual-Port PCI Express x4
Ethernet Network Card
User Manual
RC-NIC416Dual
5
2.2 Hardware Installation
1. Turn on the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector with the selected
PCIe slot on the motherboard. Push the board down firmly. This card works
in PCI Express slots of additional lanes (x4, x8, x16 slots).
5. Replace the slot bracket’s holding screw to screw the card.
6. Secure the computer cover and reconnect the power cord.
2.3 Driver Installation
The following section shows you how to install 10G Dual-Port PCI Express x4
Ethernet Network Card driver on different operating systems.
2.3.1 Installation for Windows
1. Insert the provided CD into your disk driver. The CD-ROM will start
automatically. When the following screen appears, click "Install Driver".
Note: If the install program doesn’t run automatically, please locate and
double-click the Autorun.exe file in the CD to launch the install program.
