Wireless Dual Band PCI-Express Adapter
User Manaul
RNX-AC600PCEv3
5
2.2 Software Installation
The adapter’s Setup Wizard will guide you through the installation procedures for Windows XP,
Windows 7, Windows 8, Windows 8.1 and Windows 10. The procedures in different systems
are similar, therefore we have presented the procedures in Windows 10 as an example.
Important Notice:
In order to install the driver successfully, please uninstall other Wi-Fi drivers before installing
the RNX-AC600PCEv3 driver. Installing two or more Wi-Fi adapter drivers in one PC may
cause conflicts between the drivers and cause the Wi-Fi adapter to fail to work. You can find
the installed Wi-Fi adapter drivers and uninstall from the Control Panel -> Install and Uninstall
Software.
If the PC has an integrated Wi-Fi adapter, turn it off before installing the RNX-AC600PCEv3
driver. Otherwise, the system will not show which Wi-Fi adapter is working and it may cause
conflicts between the adapters.
Follow the steps below to install the RNX-AC600PCEv3 driver on your Windows PC:
1. Insert the Resource CD into your CD-ROM drive; AutoRun window will pop up (Figure 2-2).
Click the "Driver Installation"
button to start
the installation procedure. If AutoRun does not work, browse the CD, open the folder and
double-click "Setup.exe" to begin.
2. The InstallShield Wizard will pop up (Figure 2-3) and start installing the driver automatically.
This process may take 1-3 minutes (Figure 2-4). Do not click the "Cancel" button,
otherwise the installation will stop.
Figure 2-3
Figure 2-2
