The ceramic hob
11
The razor blade scraper:
KEEP
THE
SCRAPER
AWAY
FROM
CHILDREN
. Use the
razor blade scraper carefully. The razor blade is
extremely sharp.
Use the scraper to remove spillages from the ceramic hob.
You will have to turn the razor blade round before using it for
the first time since it has been reversed for transport safety
reasons. There is a protective cover for the sharp razor blade
when the scraper is not being used.
1
Press down the button on the top of the scraper and
push it forwards as far as it will go (see illustration).
2
Remove the razor blade. Replace the blade with the
sharp edge outwards.
3
“Lock” the blade with the tabs on the scraper
(see illustration).
4
Press the button down hard and push it backwards as
far as it will go.
TO
USE
THE
SCRAPER
,
FOLLOW
THESE
INSTRUCTIONS
:
1
Expose the razor blade by pushing the button (on the
top of the scraper) forwards to “stop” (see illustration).
You can check the razor blade is locked into position by
pushing the blade down onto a hard surface.
2
Make sure the razor blade is clean and not worn other-
wise it might damage the hob. New razor blades can be
bought from drugstores.
3
Angle the scraper at approx. 45° and scrap away the
spillage. The razor blade can be pressed down hard
onto the hob without causing any damage.
4
Use kitchen roll paper to wipe clean the blade carefully.
5
When you have finished, press down the button and
push it backwards as far as it will go. Keep the scraper
out of the reach of children.
