result in damage to the player.
Installing your DVD player
Note: Do not attempt to install or service your player by yourself. Installation or
servicing of the player by persons without training and experience in electronic
equipment and automotive accessories may be dangerous and could expose
you to the risk of electric shock or other hazards.
Wiring and connections
To install the player
1. To prevent short circuits, remove the key from the ignition and disconnect the
terminal of battery.
2. Attach the metal mounting plate to the roof using the screws.
3
. Connect input and output cables.
4. Connect the wire harness in the following order: ground wire, battery wire,
ACC wire and door wire.
5. Attach the DVD player to the metal mounting plate using the CM 4x10
screws.
8