13
Rosen Electronics
SOURCE
SETUP
USING MENU AND NAVIGATION BUTTONS
13 Source
This button allows you select the Internal DVD/CD player, the Internal
Game or the Auxiliary Input. You can also select the optional TV Tuner,
DVD changer, or other optional auxiliary sources, if installed.
Note: The Mode button on the control panel performs the same
function.
14, 22
Up/Down Navigation Arrows
Press to move up or down in a menu or to change channels when
watching TV.
17, 19
Left/Right Navigation Arrows
Press to move left or right in a menu. Also used to change frequencies
on the FMT, after the Speaker Sound button is pressed.
18 Enter
Press to make a menu selection.
21 Setup
Pressing this button brings up the DVD player setup screen.
15 Info Menu
Pressing this button brings you into the DVD player menu.
USING AUDIO BUTTONS
9 Speaker Sound Control
When this button is pressed,
“Speaker Sound On”
appears on the
screen, along with the FM frequency to which you should tune your
radio, such as “
FM 88.1.
” To change the frequency, press the
LEFT
or
RIGHT
arrow buttons on the remote control and wait two seconds for
the station to set. Headphone audio is not affected by this button.
FM frequencies available
: Find a frequency in your geographic location
that has no static transmission and set it.
Note: If the frequency does not appear on screen when this
button is pressed, an external FM Modulator is probably being
used. See page 15 for more information.
10 RES
The Rosen Electronics Sound RES button cycles through various
sound enhancements.
11 Mute
Press once to mute all system audio. As long as the Mute function is
active, “Mute” will appear on the screen. Press again to turn Mute off.
