Installation Guide GM Series
Rosen Entertainment Systems
Copyright 2009 all rights reserved
Installation Guide
DP-GM0714 IG Rev D
Page 7
Navigation Touch Screen Calibration –
Note
: The Navigation Calibration Screen is only available for a short time, after the vehicle is switched ON… To
access the Navigation Calibration Screen, Select NAV as soon as the System Self Test has finished.
Step 1: Start the Rosen Unit, and
wait for the Self Test to
completed
Step 2: Select NAV after the Self
Test has completed
Step 3: Touch the Screen
quickly, before it “Times
Out.” If needed, repeat
Steps 1 and 2.
Step 4: Follow the On-Screen
instruction to adjust the
calibration.
12 Installer Settings
Installer Settings Screen –
The Installer can enable and disable several option features of the Rosen Unit. To access the Installer Settings
screen, follow the steps below.
Step 1: Select Main from any
Screen
Step 2: Select the AV Icon
Step 3: Touch the UPPER RIGHT
CORNER of the Screen
Enter “7253” and “Enter”
Step 4: Enable or Disable the
desired functions
Note
: The following settings can be changed from this screen:
1. Enable/Disable the Rosen Blue Tooth Interface
2. Enable/Disable the Video Over-Ride connected to the Parking Brake (Use for testing only)
3. Enable/Disable RDS/RBDS feature
4. Enable/Disable Satellite Radio Interface
5. Reset the Factory Settings
Touch the Screen to
Calibrate
NOTICE: If this Vehicle is equipped with FACTORY BLUE TOOTH, the Rosen Integrated
Blue Tooth must be set to OFF in the Installer Setting Menu.