background image

 
 
 
 
 

Rosen Entertainment Systems 

 

Copyright 2008 all rights reserved 

Multi-Media Navigation System Installation Guide 

 

 DS-VW0714 Rev A 

Installation Guide

 

 

 
 

                                NOTICE OF INTENDED INSTALLATION AND USE                        

E  

            

THE ROSEN MULTI-MEDIA NAVIGATION SYSTEMS CONTAIN AN INTERNAL VIDEO PLAYER, WHICH IS 

NOT INTENDED FOR VIEWING BY THE DRIVER.  THE VIDEO PLAYER IS DISABLED WHEN THE 

VEHICLE IS IN MOTION THROUGH A CONNECTION TO THE PARKING BRAKE.  THE INSTALLER OF 

THIS PRODUCT MUST INSURE THE VIDEO DISABLE CONNECTION IS WORKING PROPERLY PRIOR TO 

DELIVERY OF THE VEHICLE.  IMPROPER INSTALLATION COULD DISTRACT THE DRIVER OR 

INTERFERE WITH SAFE OPERATION OF THE VEHICLE, WHICH COULD RESULT IN SERIOUS INJURY 

OR DEATH, AND COULD ALSO VIOLATE STATE AND/OR FEDERAL LAW.  

 

ROSEN ENTERTAINMENT SYSTEMS DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY OR 

PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR UNINTENDED INSTALLATION 

AND/OR USE.

 

 
 
 

BEFORE YOU START THE INSTALLATION, READ THIS GUIDE! 

Rosen Multi-Media systems are the easiest-to-install OEM Radio replacement systems available today. 

However, we

 

strongly recommend reading this guide before starting the installation! 

 

For additional technical tips, please visit 

www.Rosendealercentral.com 

 
 

1 - Make sure you have the tools you will need 

 

These common items are needed to complete this installation: 

 

·

 Digital multi-meter (DMM) 

 

·

 #2 Phillips screwdriver  

·

 Panel removing tools   

·

 1/4” drive sockets are often needed for dashboard and trim disassembly 

·

 Torx or Allen-drive wrenches if they are used on any panels you will be removing  

·

 A DVD or CD

 

in good condition

 for testing the system 

 

Standard installation parts you may need include wire, wire ties, wire crimp connectors or solder, electrical 
insulating tape, and foam tape. Installation of aftermarket automotive electronics also often requires access to 
special parts. It is a good idea to have a source for these common installation parts. 

  

DS-VW0710   Volkswagen Series 

Summary of Contents for DS-VW0710









Reviews: