Installation Guide Toyota 4-Runner
Rosen Entertainment Systems
Copyright 2011 All Rights Reserved
Installation Guide
DP-TY10A4 Rev A
Page 4
Remove OEM Radio Mounting Bracket
Carefully remove OEM left & right hand side radio
bracket and relocate onto Rosen unit using
supplied
Rosen screws
.
Remove OEM Vents
Carefully remove OEM vents and Hazard switch from
OEM radio and carefully relocate to Rosen unit
Remove Dash Tray
Carefully remove tray from top of OEM radio and
carefully relocate to Rosen unit.
Image at right shows dash tray removed.
LOCATING REMOTE COMPONENTS
You will need to mount the GPS and Optional Satellite Radio Antennas on the exterior of the vehicle.
And mount the iPod Interface Connector in the vehicle. The following steps will help guide you
through this process.
STEP
3
Use Caution around SRS Components
I
t is the
installer’s responsibility
to ensure that the safety
equipment in the vehicle is
NOT
adversely affected by
installation of this system. Ensure that the routing of the
harnesses do NOT obstruct airbags, SRS or other safety
devices.
CAUTION
CAUTION
