Rosen Aviation SlimLine 1700 Technical Manual Download Page 2

17” Slimline LCD

Page 1

Table of Contents

Introduction and Monitor Overview .................. 3
Monitor Diagram ................................................. 4
Pinouts ................................................................ 5

Main Interface Signal ........................................................ 5
External Control Interface ................................................. 8
RGB or Composite Video Option Selection ...................... 9

Installation Instructions ................................... 10
Operation .......................................................... 12

Power Status LED ........................................................... 12
Front Switch Panel Features ........................................... 12
On Screen Display (OSD) Main Menu ............................ 13
Source Submenu ............................................................ 13
Display Submenu ............................................................ 14
Scaling/Position & Size Control Submenu ...................... 14
Picture in Picture Control Submenu ................................ 15

Troubleshooting ............................................... 16
Specifications ................................................... 18

17” Monitor DO-160D Test Matrix ................................... 19

Technical Support ............................................ 19
Disclaimer ......................................................... 20

Summary of Contents for SlimLine 1700






















Reviews: