Rosen Aviation
Document Number: 100173
Revision: G
Date: 17 April, 2007
Template: 4.2.3-6-FM; Revision A; 16 May, 2005
Page 5 of 10
2. ROSEN DVD PLAYER INDICATORS, CONTROLS AND CONNECTIONS
Figure 1 Rosen DVD Player front case showing LEDs and control buttons
2.1. Front Case Indicators and Controls
Menu
: If a disc is inserted, pressing Menu will access the disc menu. If no disc is inserted,
pressing Menu will access the DVD player’s setup menu.
◄◄
: Press this control to navigate left in a menu. If held in while a DVD is playing, this button
will serve as a “rewind” for the DVD. Continue to hold the button and different rewind speed
options become available.
►►
: Press this control to navigate right in a menu. If held in while a DVD is playing, this button
will “fast forward” the DVD. Continue to hold the button and different fast forward speed options
become available.
Λ
: Press this control for navigating up through menu options.
V
: Press this control for navigating down through menu options.
►
II
: Press this control to pause or play the movie. When navigating through a menu, this button
is used to select menu options.
■
: Press this control to stop the movie. When
■
is
pressed once, press the
►
button to resume
the movie where it was stopped. If the
■
button is pressed twice, then pressing the
►
button will
start the movie back at the beginning.
О
: Press the power button to turn the DVD player ON or put it into Standby Mode.
▲
: Press the eject button to eject or insert a disc.
Note
: The DVD player default setting is Auto Play.
LED Definitions
:
All LEDs are inactive when no power is supplied.
DISK STATUS
LED: Solid green indicates there is a disc in the mechanism; blinking
indicates the DVD mechanism is opening or closing; and LED off indicates that there is
no disc.
