Rosen Aviation
Digital Wireless Headphone System
Document Number: 103517
Revision: A
Date: 11/23/09
Template: 4.2.3-6-FM; Revision A; 16 May, 2005
Page 7 of 10
5. INSERTING THE BATTERIES INTO THE HEADPHONES
There are two battery compartments, one in each earpiece.
1.
To open the battery compartment, press the center of outer edge of either earpiece
firmly
– the battery compartment lid will pop open.
2.
Insert the battery by pressing the bottom of the battery down against the spring at the
bottom of the battery compartment. The battery should snap into place.
3.
To remove the battery, pull the top of the battery down against the spring at the
bottom of the battery compartment.
4.
Close the battery compartment by pushing the middle section of the lid.
.
Figure 2 Right earpiece
Figure 3 Open battery compartment
Note:
Never leave batteries inside the headphones for long periods of time to prevent damage to
the headphones from leaking batteries.
Push center
of outer edge
of battery
compartment
to access
batteries
