119
Reference Manual
00809-0100-4530, Rev DD
May 2016
5.
Configure the transmitter by selecting the appropriate tab. See
configuration parameters” on page 88
for information on the various configuration
parameters.
5.8
Basic configuration using DeltaV
The Rosemount 5300 Series supports DD Methods for DeltaV to facilitate transmitter
configuration. The following description shows how to use DeltaV with AMS Device
Manager to configure the Rosemount 5300 Series. The corresponding F
OUNDATION
Fieldbus
commands are also shown.
To configure the Rosemount 5300 Series with DeltaV:
1.
From the
Start
menu, select
DeltaV
>
Engineering
>
DeltaV Explorer
.
2.
Navigate through the file structure to find the Rosemount 5300 Series Transmitter.
3.
Right-click the Rosemount 5300 Series Transmitter icon and choose
Properties
.
4.
The Fieldbus Device Properties window lets you enter device tag and description.
This information is not required for the operation of the transmitter and can be left
out if desired.
General information such as device type (Rosemount 5300), manufacturer, device
ID are presented. The Rosemount 5300 Series device ID consists of the following
components:
Manufacturer
ID-Model
-
Serial Number
.
Example: 0011515300 Radar T2-0x81413425.
Check that the information complies with the ordering information.
5.
Select the desired transmitter in the
DeltaV Explorer
and choose the
Configure
option.