Wood Case
4
Step 4
Attaching to the wall
Fasten to the wall through the back cross pieces using #8x3 “ screws and
using a level to make sure rack is mounted square on the wall. Make sure
back cross piece has ” dia pilot holes drilled before screwing to wall.
For a professional looking job you can use a nail set to indent the nail
heads and wood filler to fill in the nail holes on the front cleats, baseboard
and crown moulding. Give the part that was filled a light sanding with 180
grit sandpaper.
3
32
Step 3
Attaching
FRONT
cross pieces and spacers.
Nail the cross pieces under the 2nd, 3rd, 4th, 5th and 6th
cleat starting from the bottom. Nail the spacers on the
1st and 7th support cleat as shown.
Install spacers on 1st and 7th
support cleat as shown
Install cross pieces on support
cleats as shown.
Crown moulding
attached to top of rack
1
2
1
baseboard attached
to bottom of rack
1
4
3
Apr/23/2012
Toll Free: 1-888-253-6807
www.RosehillWineCellars.com
6ft Premier Cru
Kit Rack