background image

Wood Case

1

Fasteners

 

 

 finishing nails to 

fasten cross pieces 

 

 brad nails if using 

pneumatic brad nailer 

 

 screws to attach 

to other modules 

 

 screws for attaching 

racks to wall 

 

1

4

1

1

4

1

1

4

#8x1

#8x3

 

Tips:

 

1.

 

Using pneumatic brad nailer will make assembly 

quicker and easier. 

 

2.

 

Before opening any boxes, if multiple units and 

different units have been ordered, please assemble 

all boxes by units to ensure that specific unit parts 

are not intermixed with other units. 

 

3.

 

It is highly recommended to drill 

 dia pilot 

holes on back cross pieces for 

 screws 

before attaching to wall. 

3

32

#8x3

Assembly Instructions -6Ft-

 

Tools Needed:

 

 

Hammer 

 

Pneumatic Brad Nailer 

 

Power drill 

 

Level 

 

Power miter saw (Preferred) 

 

 pilot drill 

 

Nail Set 

 

Wood filler (Optional) 

 

180 grit sand paper (Optional) 

 

3

32

(Preferred)

Apr/23/2012

Toll Free: 1-888-253-6807 

www.RosehillWineCellars.com

6ft Premier Cru

Kit Rack

Summary of Contents for 6ft Premier Cru Kit Rack

Page 1: ...ts have been ordered please assemble all boxes by units to ensure that specific unit parts are not intermixed with other units 3 It is highly recommended to drill dia pilot holes on back cross pieces for screws before attaching to wall 3 32 8x3 Assembly Instructions 6Ft Tools Needed Hammer Pneumatic Brad Nailer Power drill Level Power miter saw Preferred pilot drill Nail Set Wood filler Optional 1...

Page 2: ...od Case 2 1pc Right end ladder 3 4 72 1pc Left end ladder 3 4 72 11 pcs Spacers 10 pcs Cross piece Crown Baseboard Apr 23 2012 Toll Free 1 888 253 6807 www RosehillWineCellars com 6ft Premier Cru Kit Rack ...

Page 3: ...t cleat 2nd support cleat 3rd support cleat 4th support cleat 5th support cleat 6th support cleat 7th support cleat First cleat is located from the bottom of the ladder 3 4 1 Install spacers on 1st and 7th support cleat as shown Install cross pieces on support cleats as shown Step 2 Attaching middle spacers Place each spacer into middle support cleat slots and nail from the outside Apr 23 2012 Tol...

Page 4: ...t cleats baseboard and crown moulding Give the part that was filled a light sanding with 180 grit sandpaper 3 32 Step 3 Attaching FRONT cross pieces and spacers Nail the cross pieces under the 2nd 3rd 4th 5th and 6th cleat starting from the bottom Nail the spacers on the 1st and 7th support cleat as shown Install spacers on 1st and 7th support cleat as shown Install cross pieces on support cleats ...

Reviews: