23
5.3 Installing the battery
1. Unlock the lock with the key.
2. Make sure the contacts on the upper holder are free from dirt.
3. Place the battery pack with the contacts on the upper holder on
the e-bike.
4. Tilt the battery into the lower holder until it is secured by the
safety restraint.
5. Press the battery down so that it clicks into place.
6. Check whether the battery pack is tightly seated.
7. Lock the battery pack and remove the key.
5.4 Switching the e-bike system on
You can activate the e-bike system via the Kiox on-board computer, the SmartphoneHub or the battery pack.
The e-bike system can only be activated when the following requirements are met:
• A sufficiently charged e-bike battery is inserted.
• When using the Kiox system, please make sure the Kiox on-board computer is properly fitted.
Switching the e-bike system on via the Kiox on-board computer or SmartphoneHub
1. When using the Kiox system, please make sure the Kiox on-board computer is properly fitted.
2. Press the on/off button ”
” on the Kiox display or SmartphoneHub.
Switching the e-bike system on via the battery pack
1. When using the Kiox system, please make sure the Kiox on-board
computer is properly fitted.
2. Press the on/off button “
“ on the battery.
The pedal assistance is activated once you start to pedal (except
when in WALK mode or OFF). The power of the motor depends on
the assistance level selected.
