Rose electronics VSP-1X16V Installation And Operation Manual Download Page 2

LIMITED WARRANTY 

Copyright Rose Electronics 1990 – 2006. All rights reserved. 
No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any 
form or any means, electronic or mechanical, including photocopying and recording, without the 
prior written permission of Rose Electronics. 
 
Rose Electronics Part # MAN-VSP  
Printed In the United States of America 

 Revision 2.3

 

Rose Electronics warrants the Video Splitter™ to be in good working order for one year from the date of 
purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working order 
at any time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the Unit 
as set forth below. Repair parts and replacement units will be either reconditioned or new. All replaced parts 
become the property of Rose Electronics. This limited warranty is valid only if repairs are performed by Rose 
Electronics or a Rose qualified service technician.  This limited warranty is void if repairs are not performed 
by Rose Electronics or a Rose qualified service technician. This limited warranty does not include service to 
repair damage to the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit, 
including static discharge and power surges. 
 
Limited Warranty service may be obtained by delivering this Unit during the one-year warranty period to Rose 
Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail, 
you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to 
the warranty service location, and to use the original shipping container or its equivalent. You must call for a 
return authorization number first. Under no circumstances will a Unit be accepted without a return 
authorization number. Contact an authorized repair center or Rose Electronics for further information.  
 
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A 
PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER 
EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW 
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT 
APPLY TO YOU.  
 
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE 
REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE 
ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST 
SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF 
OR THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED 
DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY 
ANY OTHER PARTY.  
 
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO 
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER 
RIGHTS WHICH MAY VARY FROM STATE TO STATE. 
 
 
 
 
 
 
 
 
 
 
 
 
IBM ®, AT, and PS/2 are trademarks of International Business Machines Corp.  
Microsoft ® and Microsoft Windows™ are registered trademarks of Microsoft Corp.   
Apple, Macintosh, and ADB are trademarks of Apple Computer, Inc. 
Sun is a registered trademark of Sun MicroSystems Inc. 
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owner. 

 
 
 
 

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, if 
not installed and used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a residential area is likely 
to cause harmful interference in which case the user will be required to correct the interference 
at his own expense. 

Summary of Contents for VSP-1X16V



















Reviews: