INTRODUCTION
Vista DP KVM Switch Manual
1
Disclaimer
While every precaution has been taken in the preparation of this manual, the manufacturer assumes no
responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting
from the use of the information contained herein. The manufacturer reserves the right to change the
specifications, functions, circuitry of the product, and manual content at any time without notice.
The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances
outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury
arising directly or indirectly from the use of this product (See limited warranty).
System Introduction
Thank you for choosing the Vista DP. It is the result of Rose Electronics commitment to providing state-of-the-
art solutions for today’s demanding workplace. a dedicated multi-platform KVM switch. It is capable of
managing up to four 4K computers through a single managing computer. The Vista DP comes in two models -
one with a HDMI connection to the managing computer, and another one with a DisplayPort connection.
The Vista DP is DisplayPort 1.1 and HDMI compliant, and supports screen resolutions up to 4K Ultra-HD
(3840x2160 @ 30Hz. Up to four USB 2.0 devices can be connected to the unit which can be controlled by the
managing computer. The switch can be controlled through the Front Panel buttons or from the managing
computer through an RS-232 interface.
EDID pass-through and full USB and mouse emulation of all connected monitors, keyboards and mice allow for
smooth switching.
Features
■
Supports DisplayPort video resolutions up to 3840×2160@30Hz
■
Two models: DisplayPort in with DisplayPort or HDMI out
■
Fully supports Windows, Mac, and Linux
■
Supports USB2.0 devices and USB-HID keyboard/mouse
■
Switchable stereo audio
■
Access and control the switch via front panel push buttons, keyboard hot-keys or the serial RS-232 port
■
Serial control interface via the DB9 serial port using the Rose RCS-4RS/D9 4-port remote control switch
■
EDID learning and pass-through for all ports, enabling smooth and efficient video switching
■
Independent switching and use of the KVM station and USB2.0 ports
■
Complete keyboard/mouse emulation for error free booting of connected PC’s/servers
■
DVI and HDMI video can be supported by using suitable cable adapters
■
Made in USA
