Rose electronics UltraMatrix Remote 2, Installation And Operation Manual

Page: 17 / 70

ULTRAMATRIX REMOTE 2 INSTALLATION AND OPERATIONS MANUAL
11
Figure 7. Local Control Menu
Logoff
Selecting Logoff will close your current session and display the screensaver.
Restore mouse functions
Using a keyboard and monitor directly connected to the UltraMatrix Remote 2, log on and then press the hotkey
sequence <Ctrl> <Alt> <C> to view the options menu. (Does not apply if using a USB mouse.)
1. Select the ‘Restore mouse functions’ option to display:
2. Select one of the following options:
3.
Restore Standard Mouse – If PS/2 mode is required, or Restore IntelliMouse – if IntelliMouse mode is
required.
4. Select “Back” to return to the Control menu
Select this tab to reset a mouse that has ceased to
function correctly. The UltraMatrix Remote 2 provides a
feature to reinstate PS/2 mouse communications.
There are two main types of data formats used by
current PC mice; ‘PS/2’ format and the more recent
‘IntelliMouse
®’
format introduced by Microsoft. These
use slightly different data arrangements and it is
important to know which type was being used before
you hot-plugged the computer to the UltraMatrix
Remote 2. The previous setting depends both on the
type of mouse and the type of driver, as various
combinations of PS/2 and IntelliMouse are possible.
Using the incorrect restore function may produce
unpredictable results and require the computer to be
re-booted.
Figure 8. Restore Mouse Menu