UltraLink E-Series Manual
3
Control software
Rose UltraLink Device Manager software
In networked mode (see
),
you can remotely manage, monitor, and configure
your networked devices with Rose UltraLink E-series Device Manager software, This runs under Windows
on a separate PC attached to the LAN (see
Installing Rose UltraLink Device Manager software
). This
software is not required in order to operate the product, but may be required for advanced configuration
and can also be used to do switching. This is not used when connected in point-to-point mode (see
).
Figure 1. UltraLink Device Manager main screen
OSD (on-screen display)
The OSD on the receiver appliance is accessed from the keyboard. The OSD is invoked with a
programmable hot-key whose default is ScrollLock, It is available for both networked and point-to-point
modes. Use it for configuration and in networked mode to preview video streams and perform switching to
different transmitters.
Summary of Contents for UltraLink E Series
Page 7: ......
