Rose electronics RA180, Owner'S Manual

Page: 23 / 33

- 44 - - 45 -
4-3-6. Wi-Fi ON/OFF Mode Setting
Deactivate
Activate
4-3-5. Detailed IP Information
If you select IP Details, the IP details of the
amplifier are displayed.
• This function deactivates the Wi-Fi function when
the amplifier is powered off.
• After deactivation is set, power can only be
turned on through a power switch or remote
control. (Power cannot be turned on with the
mobile app.)
• This is a mode to minimize power consumption.
When Wi-Fi is deactivated, power consumption is
less than 0.5W when the power is turned off.
• This function activates the Wi-Fi function when
the amplifier is powered off.
• Power on/off is also possible on the mobile app
after activation is set.
• Although this feature has the convenience of
being able to turn the Wi-Fi function on and
off freely even on a mobile device, power
consumption when the feature is off is about
1.2 W, which is slightly more than when it is
deactivated.
This shows the current Wi-Fi activation mode. You can set the mode.
4-3-7. Auto Power Off (APO) Settings 4-3-8. Input Source Selection Function Setting 4-3-9. Amplifier Status Display
You can set on/off and time for automatic
power off (APO).
When turned off, the APO function is not
used.
When turned on, the APO function is used, and
if there is no input signal, the amplifier will
automatically shut down after the set time.
You can change the output source of the
amplifier, and you can change it to the
desired output source by turning the wheel
or selecting it.
This shows the current status values of the
amplifier.