INTRODUCTION
MultiVideo DP KVM Switch Manual
1
Disclaimer
While every precaution has been taken in the preparation of this manual, the manufacturer assumes no
responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting
from the use of the information contained herein. The manufacturer reserves the right to change the
specifications, functions, circuitry of the product, and manual content at any time without notice.
The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances
outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury
arising directly or indirectly from the use of this product (See limited warranty).
System Introduction
Thank you for choosing the MultiVideo DP. It is the result of Rose Electronics commitment to providing state-
of-the-art solutions for today’s demanding workplace. It is capable of switching up to four dual-head or quad-
head DisplayPort computers through a single user console.
The MultiVideo HDMI is DisplayPort 1.1 and HDMI compliant, and supports screen resolutions up to 4K Ultra-
HD (3840x2160 @ 30Hz). Up to four USB 2.0 devices can be connected to the unit, which can be switched in
tandem with the video or separately. The switch can be controlled through the front panel buttons. Keyboard,
hot-key commands, or from a computer through an RS-232 interface. A separate analog audio interface can
also be switched in tandem or independently. The DisplayPort signal also passes the embedded audio with no
restriction.
EDID pass-through and full USB and mouse emulation of all connected monitors, keyboards and mice allow for
smooth switching.
.
Features
■
Quad-head or dual-head video input
■
Output video can be DisplayPort or HDMI according to model
■
Resolutions up to 3840×2160 @ 30 Hz
■
DisplayPort 1.1a compliant
■
Full USB keyboard and mouse emulation to all computers provides switching without interruption
■
Independent switching of KVM, peripheral USB devices, and audio
■
Unit can be controlled using front panel push buttons, keyboard hot key commands, or RS-232 commands
from an external controller
■
Front panel LEDs indicate the active computer connection
■
Can be used with any major operating system: Windows, Linux, MAC OS
■
EDID pass-through enables smooth and efficient switching
■
Mounts in a standard 19 inch rack
