5
Rack mount instructions
To rack mount your CrystalView, attach the two rack mounting brackets
on your Unit to the rack using the appropriate size bolts, nuts and lock
washers.
The following guidelines should be observed when installing.
a). Do not exceed the operating temperature of 0
ο
C to 45
ο
C.
b). Do not block power supply vents or restrict airflow.
c). Mechanical loading of the rack should be considered to prevent
instability and possible tipping over.
d). Tighten all connectors securely and provide adequate strain relief
for all cables.
e). Provide a grounded power source to all Units. Pay special
attention to overall branch circuit load ratings before connecting
equipment to this source. Overloaded circuits are potential fire
hazards and can cause equipment failures or poor performance.
Rack mount illustration