CrystalLink USB3.1 Extender Manual
13
Transmitter and Receiver Mounting Options
The bottom of the chassis includes four convenient pre-drilled holes for optional mounting. Based on your
requirements, choose from two available mounting options:
USB Extender Mounting Kit (Purchased separately - USB Mounting Kit - Black)
USB Extender Direct Surface Mounting (Using your own M3 screws to your pre-drilled surface)
Option 1: CrystalLink USB3.1 Extender Mounting Bracket Kit
Contents:
2 mounting brackets
4 (M3) locking washers
4 (M3 x 5mm) Phillips screws
Mounting bracket installation guide (see diagram below)
1 kit is required to mount each transmitter chassis or receiver chassis
Using a Phillips screwdriver, fasten and secure the provided screws, locking washers and brackets into place.
Option 2: CrystalLink USB3.1 Extender Mounting Plate
The bottom of the enclosure features four pre-drilled holes for optional surface mounting with a spacing of
42.0mm x 77.0mm. Drill four holes into your surface and mount it using proper length M3 screws.
Note: Do not exceed a screw depth of 3/16” (4.7625mm) into the chassis or damage may occur
CrystalLink USB3.1 Mounting Bracket Illustration
CrystalLink USB3.1 Mounting Plate Holes
Figure 10. Chassis mounting options
Mounting plate
holes
Distance between
the mounting holes
is 1.653” x 3.13”
(42.0 x 77mm)