Instruction Sheet
Step 1
Assemble bottom holder bracket onto
lower pole section (this is the thicker
section of the pole).
Step 2
Screw pole onto baseplate. Tighten
securely.
Step 3
Place stand upright. Using thumbscrew
at top of pole, attach top holder
bracket onto pole top.
Step 4
Insert the poster into the Slim Holder
by either sliding the poster into the
holder or tapping the holder onto the
poster. .
Fig. 1
Slide Slim Holder into
AnoMulti Holder.
Fig.2
Step 5
Slide AnoMulti Holder onto brackets.
Install endcaps after assembly to
brackets.
Step 6
Adjust height of stand as necessary.
EconoStand
™
Instructions For Assembly
EconoStand
components
1
2
3
4
5
6
2a
Base Plate
Pole
Top
Holder Bracket
Bottom
Holder Bracket
Top
Thumb
Screw
AnoMulti
12AM300
End Cap
06-5525
The Slim
,
AnoMulti and EconoStand are trademarks of Rose Displays,
Ltd. Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSEcono/AnoMulti
Inception 9.10.02
Parts
Fig. 2
Fig. 1
