Parts
Step 3
Assemble bottom holder bracket onto
lower pole section (this is the thicker
section of the pole.
Step 4
Screw pole onto baseplate.
Tighten securly.
Step 5
Place stand upright. Using thumbscrew
at top of pole, attach top holder
bracket onto pole top.
Step 6
Slide top and bottom rails onto
holder brackets.
Step 7
Assemble split rails onto side ends
of solid rails, one inside and one
outside of each side of the AnoFrame.
Fig. 7 & 8
Step 8
Adjust height of stand as necessary.
Instructions for Assembly
Incept-9.10.02
EconoStand
components
The AnoFrame and EconoStand are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSEcono/AnoFrame
Base
Plate
Pole
Top
Holder Bracket
Bottom
Holder Bracket
Top
Thumb
Screw
3
4
5
6
7
8
Instruction Sheet
EconoStand™ with AnoFrame™
Page 2
Finished look
