The AnoScreen™ is a registered trademark of Rose Displays, Ltd. Neither
the manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INAnoScreenVario.
Incept-8.15.02
35 Congress Street, Salem, MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Instruction Sheet
Step 1
Insert corner brackets into ends of
bottom rails, using thumb, as shown
in illustration. 2 brackets per end of
each rail.
Fig. 1
Detail
Fig. 1a
- Corner bracket tension
tabs face toward outside of frame.
Step 2
Snap base Ano rail sections into the
Vario base section.
Start at one end and work the Vario
base onto the Ano rail.
Step 3
Lay out parts as they will be configured
on the floor. (2, 3 or 4 panels)
AnoScreen™
Instructions For Assembly
1
1a
2
2a
Parts
3
(continued on other side)
Vario Base
Corner Brackets
Split Rails
Vertical Rails
with Flex Spine
2a
3
3
2 Panel
3 Panel
4 Panel
Ano rails
