Parts
Instructions for Hanging
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut.
Fig. 1
Note:
It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.
Step 2
Slide the Gotcha Holder into the AnoQuick Holder.
Fig. 2
Step 3
Install MultiClips in the top AnoQuick Holder.
Holding clip at slight angle, first insert one round
end, then press down on other round end and push
MultiClip into holder. Insert second MultiClip.
Fig. 3 & 4
Step 4
Push end caps into place.
Fig. 5
Note:
To remove Gotcha (and sign), simply rotate
end cap up out of the way.
Step 5
Suspend poster.
Important note:
Please save and reuse the AnoQuick Holder, Gotcha
Holder, End Caps and MultiClips for future projects.
Instructions for Hanging
Incept-9.9.02
The AnoQuick
TM
is a trademark and Gotcha
®
is a registered trademark of
Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be
held liable for injury, loss or damage resulting from the use of these
products. Part #02INSAnoQuickGotchaMC
Gotcha
®
Special
(no clip rail)
AnoQuick
12A300R
End Caps
06-5525
MultiClips
1UP-0100
Figure 1
Figure 5
Figure 2
Figure 3
Figure 4
AnoQuick™ with Gotcha
®
Insert
Instruction Sheet
