Parts
Step 5
Screw vertical post onto screw tab on
frame and tighten.
Fig. 6
Note: Use the end of the post with
the smaller opening.
Step 6
Screw the clamp base onto the end of
the vertical post and tighten.
Fig 7
Step 7
Slide your graphic into the AnoFrame.
Fig. 8
Instructions For Assembly
Incept-9.6.02
Figure 6
The AnoFrame VersaMount is a trademark of Rose Displays, Ltd. Neither
the manufacturer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products.
Part #02INSVersaMountClampBaseSQ
Figure 8
Figure 7
AnoFrame VersaMount
TM
Clamp Base
Finished Look
#97-0421SQ
Instruction Sheet (page 2 of 2)
