21
TROUBlESHOOTINg
The controller won’t turn on!
Make sure you have tension on the power outlet. (A multimeter can be helpful in checking
this!) If you are sure that you have tension from the power outlet, connect the powercord
to the device.
If the LEDs are not lit and there is no text on the display and the display backlight is not
lit, the fuse(s) are probably blown. If you need to replace the fuses make sure to follow the
procedure explained in the section “Safety instructions”
The lEDs don’t light up!
If the display works but the LEDs don’t light up, set the controller in default mode. Push
the PRG-button, the DOWN-button and again the PRG-button.
If the LEDs are still not lit the problem probably lies in the wiring.
For all further questions or remarks, please visit the support section of our website at
www.showled.com!
In order to serve you in a better way, we invite you to send suggestions and feedback to
CONTACT INFORMATION & SUppORT CHANNElS
• Visit the support section of our website at www.showled.com.
Here you will find up-to-date FAQ’s and Tips and Tricks.
• Send your questions to [email protected], we will reply to you as soon
as possible.
• Send a Fax or place a call to Amelia N.V.
Tel: +32 3 270 36 36
Fax: +32 3 270 36 37
Office hours: Monday through Friday from 09.00 to 12.30 and 13.30 to 18.00.
Wednesdays we close at 17.00.
• Note that we are in the GMT-zone +1 hour, with the daylight saving system.
Here are some useful links to convert time zones:
www.worldtimeserver.com • www.timezoneconverter.com • www.timeanddate.com
• Contact address
Amelia NV. • Eugeen Meeusstraat 89 • B-2170 Merksem • Belgium
Summary of Contents for ShowLED Classic
Page 1: ...Controller Manual version 3 0 ...
Page 2: ...2 ...
