STSK453X Installation/User’s Manual
10
CAMERA INSTALLATION
1. Select a high and centered location
at the rear of the vehicle to mount
the STSC130 camera.
IMPORTANT:
When selecting this
location it is highly recommended
that the image transmitted by the
camera show the rear bumper and
area behind the vehicle.
2. We do not recommend mounting
the camera near the lower area of
the vehicle (ex. bumper). This
reduces the view of the camera and
increases the chance of physical
damage to the camera.
3. Once the location for the camera
is chosen, drill the mounting hole
to the inside of the vehicle using a
5/16 drill bit. Be sure to clear any
obstacles before drilling hole.
4. Attach the provided 3M double
sided tape to the back of the camera.
5. Insert camera wire through newly
drilled hole and mount securely in
place.
6. To finalize the camera installation,
hand tighten the provided 5/16 nut
to the back of the camera on the
inside of the vehicle.
Camera mount
in suggested location
Mount Camera assembly high. (centered)
Figure. 1
Figure. 2
Figure. 3
Typical monitor image of view from
properly installed camera
Position of Camera
Obstructions behind Truck