Rosco silk, User Manual

Page: 35 / 63

35
seTTInG THe DMX aDDRess
Push the MODE/SELECT Button and the DMX base address in the upper right corner of the display will flash.
Rotate the right-hand knob to the desired DMX base address (001 to 511). Once the desired address has been
selected, push the DMX set button and the display will move onto the next menu option. The display will time
out after a few seconds and revert to home screen. Alternately six pushes on the mode button will scroll through
other options and return to the home screen. Silk LED fixtures utilize 2 channels per fixture in 8 bit dimming and 3
channels in 16 bit dimming. Other, subsequent DMX addresses should be offset by 2 or 3.
Silk DMX color mapping in standard/default mode has been designed to enable easy access of color temperatures
from simple or older DMX control boards. The color temperature relates directly to the percentage on the desk,
such that if Channel 2, (base c 1), on the desk is at 30%, the color temperature will be at 3000K. In the
optional linear color profille, 0% = 2800K and 100% = 6500K interim equal steps are 15K.
KelVIn/CCT DeC %
2800 72 28
2900 74 29
3200 82 32
3600 92 36
4300 110 43
5000 127 50
5600 142 56
6500 165 65
noTe: Silk LED fixtures will maintain their current Color Temperature and Output/Dimming settings in the event of an
interruption to the DMX signal.
Full DMX mapping tables are available on the Rosco website at: www.rosco.com/silk
DeC % Color linear
0 0 2800
11 4 2905
31 12 3205
58 23 3610
104 41 4300
151 59 5005
191 75 5605
251 98 6500